View SCI0603S-39NF_4496564.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

WIREWOUND CHIP INDUCTORS
1. PART NO. EXPRESSION :
SCI0603S SERIES
SCI0603S-1N6KF
(a) (b) (c) (d) (e)(f)
(a) Series code (b) Dimension code (c) Type code : S ( Standard )
(d) Inductance code : 1N6 = 1.6nH (e) Tolerance code : G = 2%, J = 5%, K = 10% (f) F : Lead Free
2. CONFIGURATION & DIMENSIONS :
B E
C D
I
J
I
A
G
F
F
PCB Pattern Unit:m/m A B C D 0.38 Ref. E 0.76 Ref. F 0.33 Ref. G 0.86 Ref. H 1.02 Ref. I 0.64 Ref. J 0.64 Ref.
1.80 Max. 1.12 Max. 1.02 Max.
3. SCHEMATIC :
4. MATERIALS : a (a) Core : Ceramic U core (b) Wire : Enamelled Copper Wire b (c) Terminal Metallization : Ag + Ni + Au
c
NOTE : Specifications subject to change without notice. Please check our website for latest information.
H
15.01.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
WIREWOUND CHIP INDUCTORS
5. GENERAL SPECIFICATION : a) Storage temp. : -25C to +80C b) Operating temp. : -40C to +125C c) Temperature rise : 40C Max. d) Rated current : Base on temp. rise & L/L0A=10% Max. e) Resistance to solder heat : 260C.10sec
SCI0603S SERIES
6. ELECTRICAL CHARACTERISTICS : Part No. SCI0603S-1N6 F SCI0603S-1N8 F SCI0603S-2N2 F SCI0603S-3N3 F SCI0603S-3N6 F SCI0603S-3N9 F SCI0603S-4N3 F SCI0603S-4N7 F SCI0603S-5N1 F SCI0603S-5N6 F SCI0603S-6N8 F SCI0603S-7N5 F SCI0603S-8N2 F SCI0603S-8N7 F SCI0603S-9N5 F SCI0603S-10N F SCI0603S-11N F SCI0603S-12N F SCI0603S-15N F SCI0603S-16N F SCI0603S-18N F SCI0603S-22N F SCI0603S-23N F SCI0603S-24N F SCI0603S-27N F Tolerance Available K, J K, J K, J K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G L ( nH ) 1.6 1.8 2.2 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.8 7.5 8.2 8.7 9.5 10 11 12 15 16 18 22 23 24 27 Test Freq ( MHz ) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Q Min. 16 16 20 22 22 22 22 20 20 20 27 27 27 27 27 31 31 35 35 35 35 38 38 36 40 SRF ( MHz ) Min. 12500 12500 6000 >6000 5800 >6000 5800 5800 5800 5800 5800 4800 4800 4800 4800 4800 4000 4000 4000 3300 3100 3000 2850 2800 2800 DCR () Max. 0.040 0.045 0.100 0.080 0.063 0.080 0.063 0.120 0.160 0.170 0.110 0.110 0.110 0.110 0.130 0.130 0.086 0.130 0.170 0.110 0.170 0.190 0.190 0.130 0.220 IDC ( mA ) Max. 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 600 900MHz L Typ. 1.53 1.63 2.18 3.35 3.53 3.95 4.32 4.65 5.13 5.53 6.75 7.39 8.25 8.84 9.64 10.0 11.3 12.3 15.4 16.5 18.7 22.8 24.1 25.7 29.2 900MHz Q Typ. 35 35 41 47 49 49 49 53 47 56 60 62 64 62 59 66 53 72 64 55 70 73 71 45 74 1.7GHz L Typ. 1.58 1.66 2.20 3.40 3.58 3.96 4.43 4.80 5.36 5.86 7.10 7.71 8.40 9.38 10.50 10.60 12.10 13.50 16.80 18.00 21.40 26.10 28.00 30.90 34.60 1.7GHz Q Typ. 55 50 64 65 65 67 67 67 56 77 81 81 81 58 61 83 56 83 89 52 69 71 71 40 65
NOTE : Specifications subject to change without notice. Please check our website for latest information.
15.01.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 2
WIREWOUND CHIP INDUCTORS
6. ELECTRICAL CHARACTERISTICS : Part No. SCI0603S-30N F SCI0603S-33N F SCI0603S-36N F SCI0603S-39N F SCI0603S-43N F SCI0603S-47N F SCI0603S-51N F SCI0603S-56N F SCI0603S-68N F SCI0603S-72N F SCI0603S-82N F SCI0603S-R10 F SCI0603S-R11 F SCI0603S-R12 F SCI0603S-R15 F SCI0603S-R18 F SCI0603S-R22 F SCI0603S-R26 F SCI0603S-R27 F SCI0603S-R33 F SCI0603S-R39 F Inductance tolerance : : G : 2% J : 5% K : 10% Tolerance Available K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G L ( nH ) 30 33 36 39 43 47 51 56 68 72 82 100 110 120 150 180 220 260 270 330 390 Test Freq ( MHz ) 250 250 250 250 200 200 200 200 200 150 150 150 150 150 100 100 100 100 100 100 100 Q Min. 37 40 37 40 38 38 35 38 37 34 34 34 32 32 32 25 25 25 25 25 25 SRF ( MHz ) Min. 2800 2300 2300 2200 2000 2000 1900 1900 1700 1700 1700 1400 1350 1300 1300 1250 1200 1200 900 900 900 DCR () Max. 0.150 0.220 0.250 0.250 0.280 0.280 0.280 0.310 0.340 0.490 0.540 0.580 0.610 0.650 0.950 1.400 1.600 2.000 2.100 3.800 4.350 IDC ( mA ) Max. 600 600 600 600 600 600 600 600 600 400 400 400 300 300 280 250 250 200 200 100 100
SCI0603S SERIES
900MHz L Typ. 31.4 36.0 39.1 42.7 46.9 52.2 55.5 62.5 80.5 82.0 96.2 124 138 166 230 305 -
900MHz Q Typ. 47 67 47 60 44 62 69 56 54 53 54 49 43 39 25 22 -
1.7GHz L Typ. 39.80 49.50 48.90 60.20 60.30 77.20 82.20 97.00 168.00 135.00 177.00 -
1.7GHz Q Typ. 28 42 24 40 21 35 34 26 21 20 21 -
NOTE : Specifications subject to change without notice. Please check our website for latest information.
15.01.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 3
WIREWOUND CHIP INDUCTORS
7. ELECTRICAL CHARACTERISTICS : CONFIGURATTION :
SCI0603S SERIES
COVER TAPE
EMBOSSED CARRIER F0.1
40.1
G0.05
O1.5
I0.05
A0.2
E0.05
C0.1
B0.1
O1.5
DIMENSION (unit: mm) SERIES SCI0402 SCI0603 SCI0805 SCI1008 A 8.0 8.0 8.0 8.0 B 0.71 1.10 1.88 2.73 C 2.0 4.0 4.0 4.0 D 1.16 1.75 2.38 2.88 E 3.5 3.5 3.5 3.5 F 1.75 1.75 1.75 1.75 G 0 2 2 2 H 0.65 1.15 1.48 2.33 I 0.23 0.25 0.20 0.20
PACKING QUANTITY INNER REEL SERIES Q'TY (PCS) 4000 4000 2000 2000
SCI0402 SCI0603 SCI0805 SCI1008
NOTE : Specifications subject to change without notice. Please check our website for latest information.
D0.1 H0.05
15.01.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
WIREWOUND CHIP INDUCTORS
8. ENVIRONMENTAL CHARACTERISTICS : Electrical Performance Test :
SCI0603S SERIES
ITEM
1 Inductance
SPECIFICATION
TEST CONDITIONS / TEST METHODS
HP4291B
2
Q Refer to Electrcal Characteristics List
HP4291B
3
SRF
HP8753D
4
DC Resistance Rdc
Mico-Ohmmeter (GOM-801G)
5
Rated Current IDC
The device should be REFLOW soldered (2305C for 10 seconds) to a tinned copper subs rate. A dynamiter
6
Over Load Test
After test, inductors shall have no evidence of electrical and mechanical damage
Applied 2 times of rated allowed DC current to inductor for a period of 5 minute.
7
Withstanding Voltage Test
After test, inductors shall have no evidence of electrical and mechanical damage
AC voltage of 500VAC applied between inductors terminal and case for 1 minute.
8
Insulation Resistance Test
1000 MOhm min.
100VDC applied between inductor terminal and case
NOTE : Specifications subject to change without notice. Please check our website for latest information.
15.01.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5
WIREWOUND CHIP INDUCTORS
SCI0603S SERIES
Mechanical Performance Test :
ITEM
1 Vibration
SPECIFICATION
Appearance : No damage L change : within 5% Q change : within 10%
TEST CONDITIONS / TEST METHODS
Test device shall be soldered on the substrate Oscillation Frequency : 10 to 55 to 10Hz for 1 min. Amplitude : 1.5mm Time : 2hrs for each axis (X, Y, Z), total 6hrs.
2
Resistance to Soldering Heat
Appearance : No damage L change : within 5% Q change : within 10%
Pre-heating : 150C, 1 min Solder Composition : Sn/Pb=63/67 Solder Temperature : 2305C Immersion Time : 202sec Solder Temperature : 2605C Immersion Time : 52sec
3
Component Adhesion (Push Test)
1 lbs. For 0402 2 lbs. For 0603 3 lbs. For the rest
The device should be REFLOW soldered (2305C for 10 seconds) to a tinned copper subs rate. A dynamiter force gauge should be applied to the side of the conponent. The device must withstand a minimum force of 2 or 4 pounds without a failure of the termination attached to component.
3
Component Adhesion (Push Test)
The electrodes shall be at least 90% covered with new solder coating.
Pre-heating : 150C, 1min Solder Composition : Sn/Pb=63/67 Solder Temperature : 2305C Immersion Time : 41sec
4
Drop Test
After test, the chip inductor don't fell of broke on the P.C.Board
Drop 1 time for each face and 1 time for each corner. Total drop 10 times. Drop Height : 100cm Drop Weight : 125g
5
Solderability Test
The terminal should at least be 90% covered with solder
after fluxing (alpha 100 or equiv), inductor shall be dipped in a melted solder bath at 2325C for 5 seconds.
6
Resistance to solvent test
There shall be no case of deformation change in appearance of obliteration of marking
MIL-STD202F, METHOD 215D
NOTE : Specifications subject to change without notice. Please check our website for latest information.
15.01.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 6
WIREWOUND CHIP INDUCTORS
SCI0603S SERIES
Climatic Test :
ITEM
1 Temperature Characteristics 2 Humidity Resistance
SPECIFICATION
TEST CONDITIONS / TEST METHODS
-40C ~ +125C
Temperature : 402C Relative Humidity : 90~95% Time : 96hrs 2hrs Measured after exposure in the room condition for 2hrs
3
Low Temperature Storage Test
Appearance : No damage L change : within 10% Q change : within 20%
Temperature : -402C Time : 482hrs Inductors are to be tested after 1 hour at room temperature.
4
Thermal Shock Test
One cycle : Step 1 2 3 4 Total : 5 cycles Temperature (C) -253 252 853 252 Time (min) 30 15 30 15
5
High Temperature Storage Test
Temperature : 1252C Time : 482hrs Load : Allowed DC current
6
High Temperature Load Life Test
There should be no evidence of short of open circuit.
Temperature : 852C Time : 100012hrs Load : Allowed DC current Temperature : 402C Relative Humidity : 90~95% Time : 100012hrs Load : Allowed DC current
7
Humidity Load Life
NOTE : Specifications subject to change without notice. Please check our website for latest information.
15.01.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 7

▲Up To Search▲

Price & Availability of SCI0603S-39NF

	To Download SCI0603S-39NF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .